Released: 1/17/2011
File Size: 8 KB

Print Document

Force 2011 (versions 28.30 and 28.40) Photo Hunt "Hunks" Patch

Download this file and install it on your Force game to fix a Photo Hunt issue where the photo differences do not match.

To install this file, you will need:

  1. a computer with a CD or DVD-ROM burner
  2. a blank CD or DVD
  3. a CD or DVD drive
  4. cabling to connect the CD or DVD-ROM drive to the game
OR...
  1. a personal computer with a USB port
  2. a USB pen - at least 8 KB (supported by Megatouch software)
    NOTE: A USB pen kit (part number KAV-100-008-02) is available.
    To order, contact your distributor.

DOWNLOAD THE FILE TO YOUR PC
(Windows 95/98/NT/2000/XP Download Instructions)

  1. Click here to download the file:
    Patch for Force 2011
  2. Select SAVE.  The "SAVE AS" dialog box is displayed.
  3. Select a location to save the file and then click SAVE.

BURN THE FILE TO A CD OR DVD, OR COPY IT TO A USB PEN


NOTE: DO NOT UNZIP THE FILE. COPY THE FILE AS IS.


INSTALL THE FILE ON YOUR GAME

If you are using a CD or DVD:

  1. Turn off the game.
  2. Unlock and open the game, if necessary, to access the centronics connector.
  3. Connect the 2 x 20-pin IDE connector to the interface connector on the CD or DVD-ROM drive.
    NOTE: Make sure the red stripe on the ribbon cable matches up with pin 1 on the IDE interface connector.
  4. Connect the 4-pin power connector on the ribbon cable to the DC power input on the CD or DVD-ROM drive.
  5. Make sure that your CD or DVD-ROM drive is set to MASTER.
  6. Connect the centronics connector on the ribbon cable to the centronics connector on the game.
  7. Turn on the game.
  8. Insert the disc into the CD or DVD-ROM drive.
  9. Turn off the game and turn it back on. The file will install automatically.
  10. When the game displays the message Update Complete, remove the disc from the drive and turn off the game.
  11. Carefully disconnect the ribbon cable from the centronics connector on the game.
  12. If necessary, close and lock the game.
  13. Turn on the game.

If you are using a USB pen:

  1. Turn off the game.
  2. Insert the USB pen into the USB port on the outside of the game.
  3. Turn on the game. The file will install automatically.
  4. When the game displays the message Update Complete, turn off the game.
  5. Remove the USB pen.
  6. If necessary, close and lock the game.
  7. Turn on the game.